- Motorola d460
- *#06# for checking the IMEI (International Mobile Equipment Identity)
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Motorola 6200
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- These countries has been reported working:
- UK (Orange)
- AU
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Pin Outs
- Numbered left to right, keypad up, battery down
- 1. Audio Ground
- 2. V+
- 3. True data (TD) (input)
- 4. Downlink - Complimentary data (CD) (input)
- 5. Uplink - Return data (RD) (output)
- 6. GND
- 7. Audio Out - on/off
- 8. Audio In
- 9. Manual Test - ???
- 10. Battery Feedback
- 11. Antenna connector
- Motorola 7500
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- These countries has been reported working:
- IT (model: F16 HW: 5.2 SW: 2.1)
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Pin Outs
- Numbered right to left, keypad up, battery down looking
- 1. Gnd
- 2. Pos
- 3. True data (TD) (input)
- 4. Complimentary data (CD) (input)
- 5. Return data (RD) (output)
- 6. Audio gnd
- 7. Audio out
- 8. Audio in
- Motorola 8200
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- These countries has been reported working:
- ES, AU, NL, BE
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Pin Outs
- Numbered right to left, keypad up, battery down looking
- 1. Audio Ground
- 2. V+
- 3. True data (TD) (input)
- 4. Downlink - Complimentary data (CD) (input)
- 5. Uplink - Return data (RD) (output)
- 6. GND
- 7. Audio Out - on/off
- 8. Audio In
- 9. Manual Test - ???
- 10. Battery Feedback
- 11. Antenna connector
- Motorola 8400
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- These countries has been reported working:
- IT, NL
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Pin Outs
- Numbered left to right, keypad up, battery down
- 1. Audio Ground
- 2. V+
- 3. True data (TD) (input)
- 4. Downlink - Complimentary data (CD) (input)
- 5. Uplink - Return data (RD) (output)
- 6. GND
- 7. Audio Out - on/off
- 8. Audio In
- 9. Manual Test - ???
- 10. Battery Feedback
- 11. Antenna connector
- Motorola 8700
- #06# for checking the IMEI (International Mobile Equipment Identity)
- Activate RBS
- (Note: pause means the * key held in until box appears)
- To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
- You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
- De-activate RBS
- To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
- This only works with some versions of software.
- These countries has been reported working:
- AU, IT, SG, DE, ES, ZA
- What's the use of RBS:
- Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.
- Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.
- Motorola V3688
- *#06# for checking the IMEI (International Mobile Equipment Identity)
- Enhanced Full Rate Codec (EFR):
- To Enable EFR press [][][] 119 [] 1 [] OK.
- To Disable EFR press [][][] 119 [] 0 [] OK
- NOTE: Nothing appears on Screen.
- Other Phones from Motorola (CD 160, CD 520, 920, 930)
- Motorola CD 160
- Press menu and type one of these numbers and press OK:
- 11 = Status Review
- 13 = Available Networks
- 14 = Preferred Networks
- 22 = Select Keypad Tones
- 25 = Require SIM Card PIN
- 26 = Language Selection
- 32 = Repetitive Timer
- 33 = Single Alert Timer
- 34 = Set IN-Call Display
- 35 = Show Call Timers
- 36 = Show Call Charges
- 37 = Call Charge Settings
- 38 = Reset All Timers
- 43 = Reset All Timers
- 45 = Show Last Call
- 46 = Total For All Calls
- 47 = Lifetime Timer
- 51 = Change Unlock Code
- 52 = Master Reset
- 53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
- 54 = New Security Code
- 55 = Automatic Lock
- 63 = Battery Saving Mode
- Free call tip
- 1 Enter the phone number
- 2 Enter OK
- 3 Type *#06#
- 4 Press Button C
- 5 And finally press the button for power off.
- You should now be able to talk without being billed.
- Motorola CD 520
- Free call tip
- 1 Enter the phone number
- 2 Enter OK
- 3 Type *#06#
- 4 Press Button C
- 5 And finally press the button for power off.
- You should now be able to talk without being billed.
- Motorola 920/930
- The 54# Tip:
- Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
- Keyboard lock
- if you push * and # on the same time your keyboard locked. When you press it again, you unlock your keyboard.
- Supplementary Menu
- If your Motorola CD920 or 930 has the engineering software, you can get an engineering mode by typing : ***113*1*, but you have to maintain each * during 3 sec to get a square. So 3 squares, 113, 1 square, 1, 1 square, CALL.
- If the software is present you have one supplementary menu. To remove it typ ***113*0* like above.
- To put the counter to 0 even global counter, just do a reset factory in the Config menu.
- jolly than
Thursday, September 24, 2009
latest Mobile Codes For Motorola phones
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment